GOULDING
Home About Us Products Grass Growth Topical Issues Recommendations
Fertiliser Index System
Guide to Index System
Nutrient Management Plan
Grazing
Silage
1st Cut (no slurry)
1st Cut (slurry)
2nd Cut (no slurry)
2nd Cut (slurry)
Cereal Crops
Root Crops
Legume Crops
Other Crops
Goulding South product list
Goulding NI product list
Recommendations : : Silage  (1st Cut Silage - 3000 gals Slurry/Acre)

The recommendations in this section are using the RoI fertiliser classification system and are based on Teagasc research. Due to slight differences between the RoI and NI classification systems, these recommendations are only a guide for Northern Ireland farmers. They can be converted between the RoI and NI classification systems using this CONVERSION TABLE

Before choosing your fertiliser products please consult your local advisor to ensure that you do not exceed the limits for your farm as determined by the nitrates directive (SI no 378) of 2006.

Table 18. Nutrient Requirements (unit/acre)
Index N P K
1 76 28 140
2 76 24 120
3 76 16 95
4 76 0 0
- Results from Teagasc have shown that up to 85% of the Phosphorus (P) in slurry can be taken up and used by the soils.
- The Nitrogen (N) levels used assume that slurry is applied in early March and thus supplies approximately 8 units Nitrogen (N) / 1,000 gallons. 1000 gals of slurry applied in March = 50 kg bag of 8:6:39. Slurry applied in mid - summer would give Zero Nitrogen (N) value.
- The recommendations given above for nitrogen and phosphorous are the maximum permitted.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fertiliser Recommendation

Table 19. Application rate (bags/acre)
Index K1 Very Low K2 Low K3 Medium K4 High
P1 Very Low ½ x (16% Superphos)
+
3 x (24-2½-10 )
¾ x (16% Superphos) ¾ x (16% Superphos) ¾ x (16% Superphos)
P2 Low 3½
x
(24-2½-10)
2 x (Richland) 1 x (Classic NP) 1 x (Classic NP)
P3 Medium 2
(Classic NK)
½ x (Classic NK) No P or K required No P or K required
P4 High 2 x 
(Classic NK)
½ x (Classic NK) No P or K required No P or K required

For all situations, apply C.A.N., Sweetgrass or Urea to satisfy the extra Nitrogen requirement as recommended by your advisor.
Richland: 22.7 - 2.5 - 5 + 3% Sulphur (S) + Copper (Cu), Manganese (Mn), Magnesium (Mg) and Zinc (Zn).This product is ideal for supplying N, P, K and essential trace elements for growing top quality grass and silage
Sweetgrass: 23% Nitrogen (N) + 2% Sulphur (S) + 1.2% Magnesium (Mg) + 5% Sodium (Na).This product is especially formulated with the grass farmer in mind. The Sulphur and Magnesium will help to increase grass protein while the Sodium will encourage cows to have higher dry matter intakes, making it an excellent product for growing top quality silage.
Where Sulphur (S) is required, choose a product from our product list with similar N, P, K contents to the products recommended above, and apply. The Teagasc recommended level for silage is 20 units/S/acre/per year. For more information on Sulphur go to Fertiliser index system page.
 
Back to Top ^
 
 
 
 
Goulding Chemicals Limited, Centre Park Road, Marina, Cork, Ireland
Tel: +353 (0)21 4911 611   |   Fax: +353 (0)21 4911 660   |   Email: sales@gouldings.ie
Origin Enterprises PLC
2002 © Goulding Chemicals Ltd
Legal Disclaimer Site Map Contact Us Code Of Practice Website Links